Mudguards & Racks

Please email us for international shipping costs and custom orders

VO 37mm Hammered Mudguards

VO 37mm Hammered Polished Mudguards

Full-length - Fit 700c and 27” wheels with

tyres up to 27mm wide - Pre-drilled

All Fixings included (5mm alloy stays)

Fitting instructions can be found here

Stock: SOLD OUT

£45.00 GBP

VO 45mm Polished Mudguards

VO 45mm Polished Smooth Mudguards

Full-length - Fits 700c and 27” wheels with

tyres up to 35mm wide - Pre-drilled

All Fixings included (5mm alloy stays)

Fitting instructions can be found here

Stock: 4

£40.00 GBP

VO 37mm Polished Mudguards

VO 37mm Polished Smooth Mudguards

Full-length - Fits 700c and 27” wheels with

tyres up to 27mm wide - Pre-drilled

All Fixings included (5mm alloy stays)

Fitting instructions can be found here

Stock: SOLD OUT

£40.00 GBP

VO Leather Mudguard Mudflap

VO Coloured thick-leather mudflap

Handmade in the USA and cut from Wickett

and Craig fine harness leather.

Attaches to the base of your muguard

Complete with mounting hardware

Stock: 0 (Black), 1 (Brown), 2 (Honey)

£10.00 GBP

VO Leather Mudguard Washers

VO leather mudguard washers

Help dampen vibrations, lessen the risk of

stress cracks and reduce noise of debris

bouncing into the mudguards.

Sold in pack of 6 - Colours may vary

Stock: 4

£3.00 GBP

Honjo 36mm Smooth Mudguards

Honjo 36mm Smooth Alloy Mudguards

Full-length - Fit 700c and 27” wheels and

tyres up to 26mm wide - Pre-drilled

Fixings included (alloy stays)

Fitting instructions can be found here

Stock: SOLD OUT

£80.00 GBP

VO 45mm Hammered Mudguards

VO 45mm Hammered Polished Mudguards

Full-length - Fits 700c and 27” wheels with

tyres up to 35mm wide - Pre-drilled

All Fixings included (5mm alloy stays)

Fitting instructions can be found here

Stock: SOLD OUT

£45.00 GBP

VO 52mm Zeppelin Mudguards

VO 52mm ‘Zeppelin’ Polished Mudguards

Full-length - Fits 700c and 27” wheels with

tyres up to 42mm wide - Pre-drilled

All Fixings included (5mm alloy stays)

Fitting instructions can be found here

Stock: 1

£40.00 GBP

VO Porteur Front Rack

VO Stainless Steel Porteur Rack

Fits 700c, 27”, 26” and 650b sized frames.

Bosses for lights, mudguard and tie-down

loops to secure loads - detachable rail.

All mounting hardware included and comes

with L-bracket if you don’t run mudguards

below - 36x29cm platform.

Fitting instructions can be found here

Stock: SOLD OUT

£120.00 GBP

VO Constructeur Rear Rack

VO Stainless Steel Constructeur Rear Rack

Fits 700c, 26” and 650b sized frames

Bosses for mudguard

Tie-down loops to secure loads

All mounting hardware included but if you

run no mudguards you need the strut

below - 11x26cm platform.

Fitting instructions can be found here

Stock: 1

£60.00 GBP

VO Fork Mount S/Steel Decaleur

VO Fork Mount Stainless Steel Decaleur

To be used with a rack or mudguard to

support your handlebar bag - Compatible

with Berthoud, TA, Ostrich, LaFuma and

many other traditional handlebar bags.

Mounts under the headset lock-nut

All hardware included - full kit

Fitting instructions can be found here

Stock: SOLD OUT (1”), 2 (1 1/8”)

£20.00 GBP

VO Stem Mount S/Steel Decaleur

VO Stem Mount Stainless Steel Decaleur

To be used with a rack or mudguard to

support your handlebar bag - Compatible

with Berthoud, TA, Ostrich, LaFuma and

many other traditional handlebar bags.

Mounts on stem clamp bolt - cut to

length/drill hole. All hardware included.

Fitting instructions can be found here

Stock: SOLD OUT

£20.00 GBP

VO 45mm Stainless Mudguards

Stainless steel - Better dent resistance

Full-length - Fit 700c and 27” wheels

All fixings included (5mm alloy stays)

Fitting instructions can be found here

Stock: 2

£40.00 GBP

VO 60mm 26” Polished Mudguards

VO 60mm 26” Polished Alloy Mudguards

Full-length 80cm front, 110cm rear - Fit 26”

wheels with tyres up to 50mm wide -

Pre-drilled - All fixings Included

Fitting instructions can be found here

Stock: 1

£40.00 GBP

VO Constructeur Front Rack

VO Stainless Steel Constructeur Rack

Fits 700c, 27”, 26” and 650b sized frames.

Bosses for lights, mudguard and tie-down

loops to secure loads - tang to secure to

mudguards or brake bolt as well.

All mounting hardware included.

23x10cm platform

Fitting instructions can be found here

Stock: 2

£70.00 GBP

VO Rack Strut

VO Stainless Steel Rack Strut

A simple metal strut that attaches to the

Constructeur Rear rack above

above enabling you to mount it to

the brake brige or fork crown.

This is not needed if you plan to mount

the rack to metal mudguards in the

traditional way.

Stock: 1

£4.50 GBP

VO L-Bracket

VO Single Bolt L-Bracket - 6mm bolt inc.

Alternative to the fork crown daruma bolt

normally supplied for the front mudguard

if space under the fork crown is an issue

Can be used on front or rear mudguard

Stock: 5

£2.50 GBP

VO Rackaleur Front Bag Mount

Simple way to carry a front bag on a bike

without a front rack - Fits on a traditional

quill stem with no tools or dismantling

needed - Polished Stainless Steel

Will not fit Ahead stems as they are too

wide - Requires strap or bungee to secure

bag over bumps

Stock: SOLD OUT

£22.50 GBP

VO 45mm 650b Hammered ‘guards

VO 45mm 650b Hammered Mudguards

Full-length - Fits 650b wheels with tyres

up to 35mm wide, also fit well on slick

tyred 26” wheels - All Fixings included

Fitting instructions can be found here

Stock: 2

£45.00 GBP

VO Randonneur Front Rack with Integrated Decaleur

VO Stainless Steel Randonneur Front Rack

with Integrated Decaleur.

Fits 700c, 26” and 650b sized frames

equipped with caliper brakes. Ideal

for medium sized bags (approx 20cm tall).

Bosses for mudguard and light mounts.

All mounting hardware included.

Fitting instructions can be found here

Stock: 1

£65.00 GBP

VO Pass Hunter Front Rack with Integrated Decaleur

VO Stainless Steel Pass Hunter Front Rack

with Integrated Decaleur.

Fits 700c, 26” and 650b sized frames

equipped with cantilever brakes. Ideal

for medium sized bags (approx 20cm tall).

Bosses for mudguard and light mounts.

All mounting hardware included.

Fits most frames but slight bending

of the arms may be needed on some.

Stock: 3

£65.00 GBP

VO Randonneur Front Rack

VO Stainless Steel Randonneur Front Rack

Fits 700c, 26” and 650b sized frames

equipped with caliper brakes.

Bosses for mudguard and light mounts.

All mounting hardware included.

Fitting instructions can be found here

Stock: SOLD OUT

£55.00 GBP

VO Pass Hunter Front Rack

VO Stainless Steel Pass Hunter Front Rack

Fits 700c, 26” and 650b sized frames

equipped with cantilever brakes.

Bosses for mudguard and light mounts.

All mounting hardware included.

Fits most frames but slight bending

of the arms may be needed on some.

Stock: 2

£55.00 GBP

VO Mudguard Stay Mount - 4mm QR

Allows you to fit mudguards on frames

without eyelets - Mounts via the quick

release skewer - Price is for one pair

Stock: 5

£3.75 GBP

VO Mudguard Stay Mount - 10mm

VO Mudguard Stay Mount - 10mm Axle

Allows you to fit mudguards on frames

without eyelets - Mounts via the hub axle

Price is for one pair

Stock: 6

£3.75 GBP

VO 5mm R-Clip

VO 5mm R-Clip - Pack of 4

These attach the mudguard stay to the

dropout eyelet - Compatible with VO and

Honjo 5mm stays - Inc. screws & washers

Stock: SOLD OUT

£3.75 GBP

VO 5mm Eyelet Bolts

VO 5mm Eyelet Bolt- Pack of 2

These daruma bolts attach the mudguard

stay to the mudguard - Compatible with VO

and Honjo 5mm stays

Stock: 5

£3.75 GBP

Nitto M12 Front Rack

Fits bikes with cantilever brakes

Lower legs attach to canti-bosses, upper

attachment goes through fork crown hole.

Boss for mudguard under central rail and

mounts for lights on either side.

10x20cm platform - Instant classic.

All mounting hardware included.

Stock: SOLD OUT

£60.00 GBP

VO 52mm 650b Zeppelin Mudguards

VO 45mm 650b Zeppelin Mudguards

Full-length - Fits 650b wheels with tyres

up to 42mm wide, also fit well on slick

tyred 26” wheels - All Fixings included

Fitting instructions can be found here

Stock: 1

£40.00 GBP